Créer mon blog M'identifier

How to Program BMW FEM BDC key by VVDI2

Le 21 août 2017, 06:29 dans Humeurs 0

Xhorse VVDI2 key programmer V4.3.0 software released BMW FEM/BDC system key programming function.

 

 

VVDI2 V4.3.0 update (2017-08-16)
*** Require firmware V4.3.0
************************************************* *********************
===== VAG V4.3.0 =====
1. Bugfix===== BMW V4.3.0 =====
1. Add BMW FEM/BDC system key learning, erase key
2. Add BMW FEM/BDC system reset KM
3. Add FEM/BDC syste backup coding, restore coding
4. Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer for help!===== Porsche V4.3.0 =====
1. Bugfix===== PSA V4.3.0 =====
1. Bugfix===== Transponder Programmer V4.3.0 =====
1. Bugfix

 

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

===== Quick Start V4.3.0 =====
1. Bugfix

FAQ:
Q: After activation the fem bdc it will work without tokens?
A:  Yes.

VVDI2 – BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

 

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2 BMW
4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
vvdi2-fem-bdc-1
vvdi2-fem-bdc-2

 

If your vvdi2 already bind to condor,then BMW FEM/BDC = 600 USD
without condor: BMW FEM/BDC = 800usdPls note:

 

1.Your vvdi2 must already has BMW OBD functions
2.After payment, pls give us serial number of VVDI2 and condor(if you have)

Instructions of FEM/BDC:
http://www.vvdishop.com/info/how-to-use-the-bmw-fem-bdc–18197.html

BMW FEM/BDC Authorization for VVDI2 (With Condor)

BMW FEM/BDC Authorization for VVDI2 (Without Condor)

 

VVDI 2 Updated to V4.3.1 (2017-08-18)
Free Download VVDI2 V4.3.1 Software

For 4.3.0 software users, just download 4.3.1 directly, no need update firmware again.

Require firmware V4.3.0
************************************************* *********************
===== VAG V4.3.1 =====
1. Copy 48 function: Support Passat B6/CC with 48 transponder
2. Bugfix

===== BMW V4.3.1 =====
1. Improvement for BMW FEM/BDC key learn
2. Bugfix

===== Porsche V4.3.0 =====
1. Bugfix

===== PSA V4.3.0 =====
1. Bugfix

===== Transponder Programmer V4.3.0 =====
1. Bugfix

===== J2534 V4.3.0 =====
1. Bugfix

===== Online Upate Tool V4.3.0 =====
1. Bugfix

 

www.vvdishop.com

VVDI2 Key Programmer vs. Tango which to choose

Le 9 août 2017, 05:58 dans Humeurs 0

Topic: VVDI2 or Tango? Which is better for auto key programming?

 

Program keys: VVDI2 via OBD, Tango from dump

 

If you are going to make keys from dump and reading with a programmer buy Tango.
If you are looking to make keys over OBD buy VVDI2 is a good tool for BMW CAS/MB EZS. (read and write MB IR key)
Tango more features, VVDI2 good for OBD

Better buy VVDI2 with VVDI Prog

 

I personally prefer Tango good support and more features, xhorse it is also a very good for obd.
If you buy VVDI2 i also recommend complement with VVDI programmer.

 

Tango has guides with pics, free with standard tool

 

I don’t know VVDI2… but I have tango and it’s excellent so long as you have good programmers too like xprog etc. Most makes/models have guides with pics. Also many makers are free with standard tool and you can just add when you need

 

VVDI2 + Tango better than Zed full

 

If you mean original Tango and VVDI2 full…than this group will be better than zed full, thats my opinion…but there is a lot of car that you will need to remove BCM’s, immo’s…etc because vvdi2 and tango are more eeprom based tools, except vvdi2 making bmw and vag over obd2, skp900 and obdstar are obd2 tools but cant help you with fiat, opel, renault and with some few brands

 

VVDI2 + VVDI Prog good for VAG + BMW

 

If you looking only for VAG + BMW , then VVDI2 and VVDI prog is way to go. No need any other tool. In VVDI2 you have also programmer similar to Tango that you can make keys buy dump, but 90% of VAG and BMW can be done by OBD in VVDI2.

 

VVDI2 = VVDI + Tango + …

 

VVDI 2 includes all the VVDI functions, the function of Tango…. has improved remote control generation and chip identification, and also enhanced the coil’s stability
Moreover, you don’t have to connect VVD2 with a computer or other devices to identify chip or detect remote frequently.

 

 

Conclusion:

VVDI2 wins! Wins in OBD making keys! Wins in VAG + BMW key programming.

 

VVDI2 BMW:

Correct odometer
Generate key
Unlock key
Fix CAS computer

 

VVDI2 VAG:

Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools

 

VVDI2 key programmer:

Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control

 

www.vvdishop.com

How to Remote BMW 315 868 433 remotes by VVDI Prog

Le 27 juillet 2017, 10:55 dans Humeurs 0

This is how to renew 315 868 433 remotes to BMW E & F series, using Xhorse VVDI Prog and PCF79XX adapter version 2.

 

What do you need prepare for BMW remotes renew:

VVDI Prog programmer

PCF79XX adapter

BMW remote (315MHz/433MHz/868MHz)

 

What kind of BMW remote VVDI-PROG supports:

 

BMW E SERIES

ORIGINAL 315  Need PCF79XX adapter

ORIGINAL 868  Need PCF79XX adapter

THIRD PARTY  Need PCF79XX adapter

 

BMW F SERIES

315 REMOTE  Need PCF79XX adapter

433 REMOTE  Need PCF79XX adapter

868 REMOTE  Need PCF79XX adapter

 

How to connect the BMW remote chipuse to PCF79XX adapter:

 

Put the chip in the IC socket

Desolder the original battery before writing the file

 

BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-CHIP: PCF7953/PCF7945

BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-CHIP

BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-IN-CIRCUIT

BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-IN-CIRCUIT

BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-CHIP: PCF7953/PCF7945

BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-CHIP

BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-IN-CIRCUIT

BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-IN-CIRCUIT

BMW-F-SEIRES-REMOTE-RENEW-CHIP: PCF7953

BMW-F-SEIRES-REMOTE-RENEW-CHIP

BMW-F-SEIRES-REMOTE-RENEW-IN-CIRCUIT

BMW-F-SEIRES-REMOTE-RENEW-IN-CIRCUIT

PCF7953/PCF7945 adapter version 2 required!!!!!!!!!!!!!

PCF7953-CHIP

PCF7953-IN-CIRCUIT

How to renew BMW remotes with VVDI Prog:

 

This is a BMW remote review from a customer who has good success.

 

I did renew 2 keys! Renew BMW series E 868 key – 100% OK usingvvdi prog v4.6.0Both worked and now are programmed to cars! 

 

Only thing you need to disconnect from PCB is battery while writing the renew file.

 

I think that is only for those who have older version of that adapter. Older version came with 33 ohm resistor and later they decided that it is not needed and newer adapters like mine came with 0 ohm resistor that is just connecting both sides together without resistance.
If you have that 33 ohm resistor then remove it and short-connect it.
If you have 0 ohm resistor, then don’t mind that first box in connection diagram. It’s not for you.

 

I did it in circuit.

PCF79XX-ADAPTER-V2-REPAIR

 www.vvdishop.com

 

http://blog.vvdishop.com/vvdi-prog-v4-6-0-renew-pcf79xx-remotes/

Voir la suite ≫